Basic Info.
Application
Local Communication Cable, Coaxial Cable, LAN Cable, Fiber Optic Cable, Long Distance Symmetric Cable, RF Cable
Conductor Material
BC/CCS/CCA/TC/CU/CCAG
Material Shape
Round Wire
Wire Core Material
Steel or Copper Wire
Product Description
Tinned copper clad steel wire, commonly known as: tinned iron wire, referred to as: tinned CP wire, mainly used for electronic component leads, PCB board jumpers, electronic guide pins; it is based on low carbon steel core wire, annealed Softened to soft steel wire, after electroless plating of copper layer, hot dip immersed in lead-free tin-based alloy; its production cost is relatively low, it is the best substitute for tinned copper wire.
Features: High strength and toughness of steel: high rigidity, easy to cut and form, in the process of assembly flow, can stand on its own without dumping, adapt to the production automation of RC components. In the case of the same elongation, the tensile strength is much higher than that of the copper wire, and the coefficient of linear expansion is also small. Has high conductivity and good bending performance. Has good solderability. Has good magnetic permeability. Has excellent high frequency characteristics. At high frequencies, the skin effect increases with increasing frequency, and the electrical conductivity of the wire can be compared to copper wires of the same cross section. It has excellent aluminum welding characteristics and good wire butt welding processability. Save a lot of copper and reduce the cost of lead wires for electronic components.
Technical Parameters:
Round wire product specifications:
Φ0.40mm-Φ1.2mm (tinned copper clad steel wire)
Φ0.50mm-Φ1.00mm (tinned copper wire)
Diameter | Tolerance | Delivery Condition | Coating Thickness | Tensile Strenght | Bend Times | Elongation | High temp test |
Φ0.5mm | 0.005mm | Soft | 15-20um | 28-35kg/mm2 | 8 | 15% | |
| | 1/2H | 15-20um | 55-65kg/mm2 | 4 | 3% | 500ºC/6S |
| | 3/4H | 10-15um | 85-90kg/mm2 | 3 | 1% | 500ºC/6S |
| | Full Hard | 10-15 | above100kg | 3 | 1% | 500ºC/6S |
Φ0.6mm | 0.005mm | Soft | 15-20um | 28-35kg/mm2 | 8 | 15% | |
| | 1/2H | 15-20um | 55-65kg/mm2 | 4 | 3% | 500ºC/6S |
| | 3/4H | 10-15um | 85-90kg/mm2 | 3 | 1% | 500ºC/6S |
| | Full Hard | 10-15 | above 100kg | 3 | 1% | 500ºC/6S |
Φ0.7mm | 0.005mm | 1/2H | 15-20um | 55-65kg/mm2 | 4 | 15% | 500ºC/6S |
| | 3/4H | 10-15um | 85-90kg/mm2 | 3 | 3% | 500ºC/6S |
| | Full Hard | 10-15 | above 100kg | 3 | 1% | 500ºC/6S |
Φ0.8mm | 0.005mm | Soft | 15-20um | 28-35kg/mm2 | 8 | 1% | |
| | 1/2H | 15-20um | 55-65kg/mm2 | 4 | 3% | 500ºC/6S |
| | 3/4H | 10-15um | 85-90kg/mm2 | 3 | 1% | 500ºC/6S |
| | Full Hard | 10-15 | above 100kg | 3 | 1% | 500ºC/6S |
Φ1.00mm | 0.008m | Soft | 15-20um | 28-35kg/mm2 | 8 | 15% | |
| | 1/2H | 15-20um | 55-65kg/mm2 | 4 | 3% | 500ºC/6S |
| | 3/4H | 10-15um | 85-90kg/mm2 | 3 | 1% | 500ºC/6S |
| | Full Hard | 10-15 | above 100kg | 3 | 1% | 500ºC/6S |
Φ1.20mm | 0.01mm | 1/2H | 15-20um | 55-65kg/mm2 | 4 | 3% | 500ºC/6S |
| | 3/4H | 10-15um | 85-90kg/mm2 | 3 | 1% | 500ºC/6S |
| | Full Hard | 10-15 | above 100kg | 3 | 1% | 500ºC/6S |
This product is suitable for: Bakelite BOBBIN, high and low frequency transformer pins, relay pins, connectors, various pin pins and so on. Special specifications are produced according to customer requirements.
Square wire product specifications: 0.4mm-1.00mm (tinned copper-clad steel square wire)
Area a×a(mm) | Tolerance | Diagonal length(mm) | Tolerance (mm) | Tensile Stregnth (N/mm2) | Elongation | Bend Time |
0.30*0.30 | ±0.01 | 0.370 | ±0.01 | ≥700 | 4 | ≥2 |
0.35*0.35 | ±0.01 | 0.430 | ±0.01 | ≥700 | 4 | ≥2 |
0.40*0.40 | ±0.01 | 0.520 | ±0.01 | ≥850 | 5 | ≥2 |
0.45*0.45 | ±0.01 | 0.580 | ±0.01 | ≥850 | 5 | ≥2 |
0.50*0.50 | ±0.01 | 0.655 | ±0.01 | ≥850 | 5 | ≥2 |
0.56*0.56 | ±0.01 | 0.750 | ±0.01 | ≥750 | 5 | ≥2 |
0.60*0.60 | ±0.01 | 0.810 | ±0.01 | ≥750 | 5 | ≥2 |
0.64*0.64 | ±0.01 | 0.860 | ±0.01 | ≥700 | 5 | ≥2 |
0.68*0.68 | ±0.01 | 0.920 | ±0.01 | ≥680 | 5 | ≥2 |
0.70*0.70 | ±0.01 | 0.940 | ±0.01 | ≥680 | 5 | ≥2 |
0.80*0.80 | ±0.01 | 1.080 | ±0.01 | ≥580 | 5 | ≥2 |
0.90*0.90 | ±0.01 | 1.210 | ±0.01 | ≥550 | 5 | ≥2 |
1.0*1.0 | ±0.01 | 1.360 | ±0.01 | ≥550 | 5 | ≥2 |
1.0*0.50 | ±0.01 | 1.060 | ±0.01 | ≥550 | 5 | ≥2 |
This product is suitable for: Bakelite BOBBIN, high and low frequency transformer pins, relay pins, connectors, various pin pins, resistor capacitors, etc.
Address:
Yinhe Massion,Yangshe Town,Zhangjiagang city,Jiangsu Province ,China
Business Type:
Manufacturer/Factory, Group Corporation
Business Range:
Construction & Decoration, Metallurgy, Mineral & Energy
Management System Certification:
ISO 9001, ISO 14001, OHSAS/ OHSMS 18001, IATF16949
Company Introduction:
Our company offers variety of products which can meet your multifarious demands. We adhere to the management principles of "quality first, customer first and credit-based" since the establishmet of the company and always do our best to satisfy potential needs of our customers. Our company is sincerely willing to cooperate with enterprises from all over the world in order to realize a win-win situation since the trend of economic globalization has developed with an irresistible force.